Canon Powershot SX500 IS Control Dial Replacement

Step 1 Battery

• Rotate the camera to expose the underside of the camera.
Step 2

• Slide the rounded rectangle tab to the left to release the battery cover.
Step 3
• Push the small orange tab forward to release the battery (Battery is ready for removal).
Step 4 Back Cover
• Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
Step 5
• Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Step 6
• Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Step 7
• Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
Step 8
• Using the plastic pry tool, remove the back cover from camera.
Step 9 Control Dial
• Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.
Step 10
• Using the Phiillips 00 screwdriver, remove the 4mm screw to the right of the control dial.
Step 11
• Using the spudger, lift the control dial to the right of the LCD screen.
Step 12
• Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.

Author

with 3 other contributors

Shelby Spiering

Member since: 04/07/15

252 Reputation

1 Guide authored

Badges: 11

• 
• 
• 

+8 more badges

Team

Eastern Washington University, Team 1-4, Plummer Spring 2015 Member of Eastern Washington University, Team 1-4, Plummer Spring 2015

EWU-PLUMMER-S15S1G4

4 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview