Introduction

User needs PH00 screwdriver, spudger, and plastic pry tool.

Rotate the camera to expose the underside of the camera.
  • Rotate the camera to expose the underside of the camera.

Add Comment

Slide the rounded rectangle tab to the left to release the battery cover.
  • Slide the rounded rectangle tab to the left to release the battery cover.

Add Comment

Push the small orange tab forward to release the battery      (Battery is ready for removal).
  • Push the small orange tab forward to release the battery (Battery is ready for removal).

Add Comment

Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen. Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen. Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
  • Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.

Add Comment

Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
  • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

Add Comment

Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
  • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

Add Comment

Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
  • Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.

Add Comment

Using the plastic pry tool, remove the back cover from camera. Using the plastic pry tool, remove the back cover from camera.
  • Using the plastic pry tool, remove the back cover from camera.

Add Comment

Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.
  • Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.

Add Comment

Using the Phiillips 00 screwdriver, remove the 4mm screw to the  right of the control dial.
  • Using the Phiillips 00 screwdriver, remove the 4mm screw to the right of the control dial.

Add Comment

Using the spudger, lift the control dial to the right of  the LCD screen.
  • Using the spudger, lift the control dial to the right of the LCD screen.

Add Comment

Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.
  • Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

One Comment

Gracias gracias gracias

edgarlugo20111917 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 172