Parts

No parts required.

  1. Before taking apart your device ensure that you have:
    • Before taking apart your device ensure that you have:

    • Turned the camera off.

    • Removed the battery to reduce the risk of shock.

    Add Comment

  2. Turn off the camera by pressing and holding the ON/OFF button that is located on the top of the camera.
    • Turn off the camera by pressing and holding the ON/OFF button that is located on the top of the camera.

    Add Comment

    • Now that the camera is off, the battery can be removed.

    • Firmly place your finger on the battery door and slide to the right.

    • Once the door is open, a small orange button will be visible. Slide this button down to release the battery.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Now you can begin to take the outer screws out. Removing these will allow you to remove the camera case. It will require a #00 Phillips Screwdriver.

    Add Comment

    • There are two screws in the left side of the camera, which are marked in the photo. Remove these screws first.

    Add Comment

    • There are two screws to remove on the right side of the camera as well, as marked in the photo. Remove these screws next.

    Add Comment

    • Finally, there are two screws on the bottom that need to be removed, which are marked in the photo.

    Add Comment

    • Now that the outer screws are removed, you can take the case off.

    • Gently separate the case from the body of the camera. The camera case will separate into two pieces.

    • Do not leave the case off for too long, as dust could settle in to the camera and impair the its functionality.

    Add Comment

    • Now you can place a new camera case on the camera. As said in the step above, be wary of leaving the case off for too long, as this could damage key components in the camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Mason Boyd

Member since: 03/23/2015

228 Reputation

2 Guides authored

Team

One Comment

I'd love to see a guide for disassembling the lens, to remove dust/lint inside.

Andrew Lamb - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 9

All Time: 487