1. With the device fully assembled, hold the camera with both hands with the bottom of the camera facing toward you.
    • With the device fully assembled, hold the camera with both hands with the bottom of the camera facing toward you.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Place your right thumb on the sliding panel that is marked Card/Battery Slide the panel to your right and you will hear a slight click. This is normal and you did not damage the device.
    • Place your right thumb on the sliding panel that is marked Card/Battery

    • Slide the panel to your right and you will hear a slight click. This is normal and you did not damage the device.

  4. Remove your thumb from the Card/Battery panel and lift the panel 90 degrees.
    • Remove your thumb from the Card/Battery panel and lift the panel 90 degrees.

    • The battery will eject slightly by the force of a spring.

    • Remove the battery and replace.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler Kelch

Member since: 03/05/2015

541 Reputation

4 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 444