Canon PowerShot SD1000 Front Case of Camera Replacement

Step 1 Back Panel



• Remove the two 2.9 mm screws from the side panel closest to the camera lens.
Step 2

• Remove the two 2.9 mm screws from the camera bottom panel.
Step 3
• Remove the two 2.9 mm screws from the side panel farthest from the lens.
Step 4
• Pull the back panel away from the camera body, starting at the end with the function buttons.
Step 5
• Remove the small cover panel and the attached wrist strap mount.
Step 6 Front Case of Camera
• Remove the front cover by gently pulling it away from the camera body.
Step 7
• Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Author

with 8 other contributors

Phillip Phung

Member since: 01/19/12

651 Reputation

9 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

Cal Poly, Team 8-18, Maness Winter 2012 Member of Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview