Canon PowerShot G11 Rear Cover Replacement

Step 1 Rear Cover

• Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.
Step 2

• Remove the four screws on the left side of the camera.
Step 3
• Remove the screw on the right side of the camera.
Step 4
• Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.
Step 5
• Remove the screw to the right of the view finder on the rear of the camera.
Step 6
• Use the spudger to crack open the case.
Step 7
• The rear case is still attached to the camera with a ribbon cable. The socket has a flip up lid that must be flipped up before the cable can be removed. Use the tweezers to flip the cable attachment up.
Step 8
• The rear cover is now unattached from the camera.

Author

with 1 other contributor

Dustin Brinegar

Member since: 01/21/15

688 Reputation

4 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

USF Tampa, Team 5-6, Brown Winter 2015 Member of USF Tampa, Team 5-6, Brown Winter 2015

USFT-BROWN-W15S5G6

3 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview