Image 1/1: Line the memory card up like it is shown in the camera and using your thumb, press down on the card until you hear a click. Your memory card is now back in place and ready for use.
  • The inside of your Canon PowerShot A4000 camera should have a picture showing how to reinsert your memory card.

  • Line the memory card up like it is shown in the camera and using your thumb, press down on the card until you hear a click. Your memory card is now back in place and ready for use.

Add Comment

Image 1/2: The memory card is stored behind the battery on the side opposite of the lens as outlined by the red rectangle in the picture. Image 2/2: To remove the memory card, use your thumb to press down on the exposed part of the card.
  • To open the battery compartment where the memory card is stored, refer to the Battery Replacement Guide.

  • The memory card is stored behind the battery on the side opposite of the lens as outlined by the red rectangle in the picture.

  • To remove the memory card, use your thumb to press down on the exposed part of the card.

  • The card will dip down further into the compartment and then you will hear a click as the card is released.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ansley Gardner

Member since: 10/13/2014

737 Reputation

7 Guides authored

Team

Clemson, Team 1-3, Benson Fall 2014 Member of Clemson, Team 1-3, Benson Fall 2014

CLEM-BENSON-F14S1G3

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 288