Introduction

This guide walks the reader through the process of removing the card/battery latch in order to replace it. There are no prerequisite guides necessary to remove the latch.

Open the Card/Battery latch by sliding the cover away from the camera in the direction indicated by the arrow.
  • Open the Card/Battery latch by sliding the cover away from the camera in the direction indicated by the arrow.

Add Comment

Move card/battery latch to 90 degrees.
  • Move card/battery latch to 90 degrees.

Add Comment

Gently rotate latch 90 degrees either clockwise or counterclockwise then remove it.
  • Gently rotate latch 90 degrees either clockwise or counterclockwise then remove it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley Fincher

Member since: 03/23/2015

409 Reputation

3 Guides authored

Team

Baylor, Team 7-14, Williams Spring 2015 Member of Baylor, Team 7-14, Williams Spring 2015

BU-WILLIAMS-S15S7G14

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 198