Introduction

This guide will walk the reader through the process of removing the front cover in order to replace it. There are no prerequisite guides that need to completed in order to remove the front cover.

Parts

No parts required.

  1. Open the A/V Out Digital port cover on the function button side to reveal a screw.
    • Open the A/V Out Digital port cover on the function button side to reveal a screw.

  2. Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom. Screws are small and very easily lost. Screws are small and very easily lost.
    • Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom.

    • Screws are small and very easily lost.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow. Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.
    • Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow.

    • Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.

  5. Gently lift the bottom of the front cover to roughly a 30 degree angle.
    • Gently lift the bottom of the front cover to roughly a 30 degree angle.

  6. Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.
    • Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley Fincher

Member since: 03/23/2015

417 Reputation

3 Guides authored

Team

Baylor, Team 7-14, Williams Spring 2015 Member of Baylor, Team 7-14, Williams Spring 2015

BU-WILLIAMS-S15S7G14

4 Members

5 Guides authored

One Comment

Are the screws really hard to remove, or is it just me?

Alex Hulinsky - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 312