Introduction
If the rubber grip on the camera is dirty or has fallen off, follow these instructions to remove the grip.
What you need
-
-
Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.
-
Gently remove the rubber grip by pulling the adhesive side up and away from the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 3-41, Maness Spring 2014 Member of Cal Poly, Team 3-41, Maness Spring 2014
CPSU-MANESS-S14S3G41
4 Members
10 Guides authored
