Introduction

This guide will take you through the steps required to change your screen and get a clear view of your picture.

Clean the broken or cracked screen as best as possible.
  • Clean the broken or cracked screen as best as possible.

  • Place the suction cup on the damaged screen.

Add Comment

While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center. While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.
  • While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

Add Comment

Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture. Remove the plastic screen from the camera. Release the broken screen by pulling down the lever of the suction cup.
  • Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

  • Remove the plastic screen from the camera.

  • Release the broken screen by pulling down the lever of the suction cup.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Michael Peck

Member since: 04/14/2014

134 Reputation

1 Guide authored

Team

Cal Poly, Team 3-41, Maness Spring 2014 Member of Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Members

5 Guides authored

One Comment

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.

cmorris - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 54

All Time: 3,350