Skip to main content

Campbell Hausfeld FP204800 Shroud Disassembly

What you need

  1. Campbell Hausfeld FP204800 Shroud Disassembly, Remove Shroud Screws: step 1, image 1 of 3 Campbell Hausfeld FP204800 Shroud Disassembly, Remove Shroud Screws: step 1, image 2 of 3 Campbell Hausfeld FP204800 Shroud Disassembly, Remove Shroud Screws: step 1, image 3 of 3
    • Unscrew the four 1cm long shroud screws using a 6mm Allen Wrench.

  2. Campbell Hausfeld FP204800 Shroud Disassembly, Remove Shroud: step 2, image 1 of 2 Campbell Hausfeld FP204800 Shroud Disassembly, Remove Shroud: step 2, image 2 of 2
    • Remove the plastic shroud from the compressor.

    • Do not pull the shroud too far from the compressor. You could damage the on/off switch wiring.

  3. Campbell Hausfeld FP204800 Shroud Disassembly, Remove The Wiring From the Pressure Switch to the On/Off Switch: step 3, image 1 of 1
    • Gently pull the wire attached from the pressure switch to the on/off switch.

    • It should come off the pressure switch with ease.

    • Make sure you are pulling the correct wire. The pressure switch could be in a different configuration on your compressor than in the picture.

  4. Campbell Hausfeld FP204800 Shroud Disassembly, Remove the On/Off Switch Wiring: step 4, image 1 of 1
    • Gently pull the wire connected from the on/off switch to the motor of the compressor.

    • It should be the only wire keeping the shroud from being lifted from the compressor.

Caleb Davies

Member since: 10/07/14

528 Reputation

4 Guides authored

Team

Cal Poly, Team 14-29, Maness Fall 2014 Member of Cal Poly, Team 14-29, Maness Fall 2014

CPSU-MANESS-F14S14G29

4 Members

7 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 825