Introduction

This guide will go over how to install O-rings on the backspace, spacebar, shift, and enter keys on your keyboard.

Image 1/3: Image 2/3: Image 3/3:

Add Comment

Image 1/1:
  • Pull the large keycap upward with your fingers until the cap separates from the plastic rings underneath the cap. If the metal bar beneath the cap comes loose during removal, snap it back in place.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the plastic rings from the keycap.

Add Comment

Image 1/2: Image 2/2:
  • Place the O-rings around the nubs underneath the keycap at each circled locations.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Shiva Empranthiri

Member since: 10/12/2014

730 Reputation

4 Guides authored

Team

Cal Poly, Team 6-23, Maness Fall 2014 Member of Cal Poly, Team 6-23, Maness Fall 2014

CPSU-MANESS-F14S6G23

4 Members

6 Guides authored

One Comment

Best choice if you want all the “click” but none of the “clack” on your mechanical keyboard

Cherry Mx Black Rubber O-rings (125 pcs -EPDM – 40A) €3,98

Cherry Mx Black Rubber O-rings (90 pcs -EPDM – 40A) €3,48

[NL] O-rings Webstore http://tigri.bigcartel.com

Specs

Material: EPDM Industrial Grade Rubber

Color: Black

Hardness: 40A

Thickness: 1,50 mm (0.059 in)

Packaging: 125 pcs/bag or 90 pcs/bag

tigriorings - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 7

Past 30 Days: 26

All Time: 864