Introduction

This short guide will show you how to properly replace the tape cassette in your label printer.

Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open. Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.
  • Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.

Add Comment

Insert the tape cassette into the area outlined in red, making sure that it snaps into place.
  • Insert the tape cassette into the area outlined in red, making sure that it snaps into place.

  • Our device did not come with a tape cassette but one should be inserted into the red outlined area shown.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Anna McCreary

Member since: 01/24/2014

101 Reputation

1 Guide authored

Team

Cal Poly, Team 13-16, Regan Winter 2014 Member of Cal Poly, Team 13-16, Regan Winter 2014

CPSU-REGAN-W14S13G16

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 17

Past 30 Days: 54

All Time: 1,776