Fix Your Stuff Community Store

Brother PT-D200 Circuit Board Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Brother PT-D200 Circuit Board Replacement, Circuit Board Cables: step 1, image 1 of 1

    • Gently pull out the ribbon cable from the circuit board.

    • The ribbon cable is very fragile.

    Edit

  2. Brother PT-D200 Circuit Board Replacement: step 2, image 1 of 1

    • Remove two-pin plastic connector from the circuit board.

    • Gently pull the two-pin connector from the circuit board to avoid damaging the board.

    Edit

  4. Brother PT-D200 Circuit Board Replacement, Circuit Board: step 3, image 1 of 2 Brother PT-D200 Circuit Board Replacement, Circuit Board: step 3, image 2 of 2

    • Remove the two 3/16" screws from the circuit board using the Helping Hand 1/4" screwdriver.

    Edit

  5. Brother PT-D200 Circuit Board Replacement: step 4, image 1 of 1

    • Release the two black clips that hold the LCD cable ribbon in place. To release, pull the clips towards the ribbon.

    Edit

  6. Brother PT-D200 Circuit Board Replacement: step 5, image 1 of 1

    • Disconnect the LCD ribbon cable from the circuit board.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Jeston Mitchell

Member since: 01/24/14

308 Reputation

3 Guides authored

Badges: 4

+1 more badge

Team

Cal Poly, Team 13-16, Regan Winter 2014 Member of Cal Poly, Team 13-16, Regan Winter 2014

CPSU-REGAN-W14S13G16

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 35