Introduction
Following this guide will show you how to access and replace the speakers.
What you need
-
-
Placing the device on its back with the BRV-HD logo facing up, remove the eight 5mm hexagon 2.0 screws on the front panel.
-
-
-
-
Locate the two wires that connect the right speaker to the motherboard.
-
Gently disconnect the wires from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
3 Comments
Where can I find a replacement speaker?
Peerless by Tymphany PLS-65F25AL01-02
Alex -
Where can I find or order a replacement speaker for BRV PRO