Skip to main content
  1. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Earpads: step 1, image 1 of 1
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Bowers and Wilkins P5 Headphones Audio Cable Replacement: step 2, image 1 of 1
    • Fold the earpads flat.

  3. Bowers and Wilkins P5 Headphones Audio Cable Replacement: step 3, image 1 of 2 Bowers and Wilkins P5 Headphones Audio Cable Replacement: step 3, image 2 of 2
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Audio Cable: step 4, image 1 of 1
    • Take the audio cable out of the clip.

  5. Bowers and Wilkins P5 Headphones Audio Cable Replacement: step 5, image 1 of 1
    • Pull out the audio cable.

  6. Bowers and Wilkins P5 Headphones Audio Cable Replacement: step 6, image 1 of 1
    • Headphones remain.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Ashley Ryan

Member since: 03/25/2012

5,538 Reputation

3 Guides authored

Team

Master Techs Member of Master Techs

Community

311 Members

1,169 Guides authored

One Comment

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 66

All Time: 8,688