Introduction
The Bosch GKS 190 is the entry-level model in the line of hand-held circular saws in the Professional Series (blue) from Bosch.
What you need
-
-
The Allen key on the saw can be used to loosen the saw blade lock. It's under the handle.
-
-
-
-
After the saw blade locking washer has been removed, the saw blade can be easily lifted out. To do this, the blade guard must be opened.
-
-
-
Below the saw blade is the silver flange bushing which is held in place by a locking ring.
-
Lever out the locking ring slightly with a thin spatula and wind it out of the locking groove with your fingers.
-
-
-
Now the flange bushing can simply be pulled off and the blade guard can simply be angled out and pulled off.
-
Follow the steps in reverse order to reassemble your device.
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
2 other people completed this guide.
Special thanks to these translators:
100%
oldturkey03 is helping us fix the world! Want to contribute?
Start translating ›