Introduction

Purchase a new Microfilter Dust Canister.

Tools

No tools required.

Parts

Move the support slider located on the bottom of the handle towards the sander. Move the support slider located on the bottom of the handle towards the sander.
  • Move the support slider located on the bottom of the handle towards the sander.

Add Comment

Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander. Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander. Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander.
  • Press the pinch point tabs located on each side of the dust canister and slide the dust canister away from the sander.

Add Comment

Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place. Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place. Take the locking tab from the original dust canister and place it on the new one.  To do this, slide it downward onto the new dust canister until it snaps into place.
  • Take the locking tab from the original dust canister and place it on the new one. To do this, slide it downward onto the new dust canister until it snaps into place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 153