Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will help teach you how to take off the rear wheels of your Boosted Board.

Tools

Parts

No parts specified.

  1. Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench. Do Not Remove the Screws.
    • Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.

    • Do Not Remove the Screws.

  2. Compress the motor mount back towards the wheel.
    • Compress the motor mount back towards the wheel.

    • While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.

    • The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now
  4. Remove the axel nut with a 1/2" socket wrench Remove the axel nut with a 1/2" socket wrench
    • Remove the axel nut with a 1/2" socket wrench

  5. Rotate and pull counterclockwise until the wheel comes off the axle completely. The front washer will come off with the wheel. Remove the back washer from the axle.
    • Rotate and pull counterclockwise until the wheel comes off the axle completely.

    • The front washer will come off with the wheel.

    • Remove the back washer from the axle.

    • Replacing the wheel requires the bearings to be switched into the new wheel.

Emily Imfeld

Member since: 10/06/2016

514 Reputation

4 Guides authored

Team

Cal Poly, Team 15-7, Livingston Fall 2016 Member of Cal Poly, Team 15-7, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G7

4 Members

6 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 8

All Time: 840