Introduction

Follow this guide to install a SIM card in the Blackberry Pearl 8100.

Tools

No tools required.

Parts

No parts required.

Image 1/2: Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off. Image 2/2: Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
  • Before working on the phone, be sure that the phone is turned off.

  • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

Add Comment

  • Remove the battery located directly below back panel.

Add Comment

Image 1/1:
  • Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).

Add Comment

Image 1/1:
  • Lift the metal casing.

Add Comment

  • Insert an SD Card.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Robert Cronin

Member since: 04/08/2010

472 Reputation

6 Guides authored

Team

Cal Poly, Team 34-57, Forte Spring 2010 Member of Cal Poly, Team 34-57, Forte Spring 2010

CPSU-FORTE-S10S34G57

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 21

All Time: 8,290