Blackberry Curve 9300 Speaker Replacement

Introduction

This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.

What you need

Step 1 Battery

Blackberry Curve 9300 Speaker Replacement, Battery: step 1, image 1 of 1

Place your Blackberry face down in front of you.

Edit

Step 2

Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.

Edit

Step 3

From the top, use your fingernail to lift and remove the battery.

Edit

Step 4 Keyboard

Blackberry Curve 9300 Speaker Replacement, Keyboard: step 4, image 1 of 1

Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.

Edit

Step 5

Place the phone face up and use tweezers to securely grip and lift the screen upwards.

Edit

Step 6

Use a plastic opening tool to lift the bottom edge of the front cover.

Edit

Step 7

Use your nails to unclip the sides of the frame from the phone.

Edit

Step 8

Lift and remove the frame.

Edit

Step 9

Lift and remove the keyboard.

Edit

Step 10 Speaker

Blackberry Curve 9300 Speaker Replacement, Speaker: step 10, image 1 of 1

Locate and remove the two 5mm screws on top of the keyboard base with a T6 Torx screwdriver.

Edit

Step 11

Carefully pull keyboard base up and away from phone.
Disconnect keyboard base from phone completely.

Edit

Step 12

Blackberry Curve 9300 Speaker Replacement: step 12, image 3 of 3

Remove the four 5mm screws on the top and bottom of phone with a T6 Torx screwdriver

Edit

Step 13

Using a prying tool, find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
Prying tool goes approximately midway between the top and bottom edge of the screen.