Skip to main content

BlackBerry Curve 8900 Antenna Replacement

What you need

  1. BlackBerry Curve 8900 Antenna Replacement, Battery: step 1, image 1 of 1
    • Remove the back cover of the phone.

    • The battery will now be visible.

  2. BlackBerry Curve 8900 Antenna Replacement: step 2, image 1 of 2 BlackBerry Curve 8900 Antenna Replacement: step 2, image 2 of 2
    • Pinch the battery at the grey semi-circles on the top left and top right corners of the battery using your fingers and remove it from the device.

  3. BlackBerry Curve 8900 Antenna Replacement, Motherboard: step 3, image 1 of 1
    • Remove the lower rear cover, using a small iFixit opening tool.

  4. BlackBerry Curve 8900 Antenna Replacement: step 4, image 1 of 1
    • Remove the six screws from the mid-frame of the device, using the T6 Torx Screwdriver.

    • Set the screws aside once they've been removed.

  5. BlackBerry Curve 8900 Antenna Replacement: step 5, image 1 of 1
    • Gently remove the mid-frame from the phone, exposing the motherboard.

    • This is the motherboard.

  6. BlackBerry Curve 8900 Antenna Replacement: step 6, image 1 of 2 BlackBerry Curve 8900 Antenna Replacement: step 6, image 2 of 2
    • Gently pull back the plastic tabs that secure the motherboard to the case.

    • Slowly pull the tabs, working your way around the case, until they are lifted and the motherboard is free.

    • Remove the motherboard.

    • The keypad and navigation ball may become loose and fall off the motherboard.

  7. BlackBerry Curve 8900 Antenna Replacement: step 7, image 1 of 2 BlackBerry Curve 8900 Antenna Replacement: step 7, image 2 of 2
    • Carefully detach the antenna from the two clips on the side of the motherboard.

    • Disconnect the antenna from the motherboard in the same manner.

  8. BlackBerry Curve 8900 Antenna Replacement: step 8, image 1 of 1
    • Carefully disconnect the ribbon cable located on the bottom right of the motherboard.

  9. BlackBerry Curve 8900 Antenna Replacement: step 9, image 1 of 2 BlackBerry Curve 8900 Antenna Replacement: step 9, image 2 of 2
    • Locate the chip underneath the screen.

    • Gently remove the screen, without applying too much pressure, taking care not to damage it.

  10. BlackBerry Curve 8900 Antenna Replacement: step 10, image 1 of 2 BlackBerry Curve 8900 Antenna Replacement: step 10, image 2 of 2
    • Lift up the motherboard from the bottom edge to reveal the ribbon cables.

    • Carefully disconnect the two ribbon cables connecting the motherboard to the display on either side.

    • Remove the motherboard and place off to the side.

  11. BlackBerry Curve 8900 Antenna Replacement, Antenna: step 11, image 1 of 1
    • Replace the entire center piece of the case to replace the antenna.

Johnny Tran

Member since: 09/10/11

473 Reputation

4 Guides authored

Team

Cuesta, Team 1-3, Zipperian Fall 2011 Member of Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Members

8 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 5,852