Skip to main content

BlackBerry 7130e Disassembly

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. BlackBerry 7130e Disassembly, BlackBerry 7130e Disassembly: step 1, image 1 of 1
    • Using the T6 Torx screwdriver, remove the bottom two screws on the back of the phone.

  2. BlackBerry 7130e Disassembly: step 2, image 1 of 1
    • Remove speaker phone cover by unsecuring the two latches on the edge close to top of the phone with the plastic opening tool.

  3. BlackBerry 7130e Disassembly: step 3, image 1 of 1
    • Detach the speaker phone cover by pulling up on the bottom of the speaker phone cover.

    • As you detach the speaker phone cover you will notice a sticky glue sealing the rubber gasket from the cover to the speaker mesh. This is normal and will correctly reset the first few times the pieces are separated.

  4. BlackBerry 7130e Disassembly: step 4, image 1 of 1
    • Remove top two screws with T6 Torx screw driver, from the back of phone.

  5. BlackBerry 7130e Disassembly: step 5, image 1 of 1
    • Turn the phone sideways and unlatch the hinge on one side of the phone by pushing inwards and twisting to the side with the plastic opening tool.

  6. BlackBerry 7130e Disassembly: step 6, image 1 of 2 BlackBerry 7130e Disassembly: step 6, image 2 of 2
    • You should now be able to easily separate the phone into two pieces.

    • The battery prong may fall out when the separation occurs, just don't loose it!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sean Tiernan

Member since: 01/20/10

5 Reputation

5 Guides authored

Team

Cal Poly, Team 3-16, Maness Winter 2010 Member of Cal Poly, Team 3-16, Maness Winter 2010

CPSU-MANESS-W10S3G16

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 989