Introduction

The orange casing must be removed before accessing the rest of the parts.

  1. Remove the following five screws Three 20 mm Phillips #1 screws One 10 mm #000 Phillips screw
    • Remove the following five screws

    • Three 20 mm Phillips #1 screws

    • One 10 mm #000 Phillips screw

    • One 13 mm Phillips 31 screw

    • When you remove the 13 mm screw, the spring may pop out of the screwdriver. Point the backside of the screwdriver away from your face and others.

  2. Remove the black sticker with recycling information.
    • Remove the black sticker with recycling information.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use your fingers or a plastic opening tool to pry the casing apart.
    • Use your fingers or a plastic opening tool to pry the casing apart.

  5. Remove the plastic slider by picking it up off the screwdriver.
    • Remove the plastic slider by picking it up off the screwdriver.

    • You may consider leaving half of the casing on the screwdriver to make handling the screwdriver easier.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katherine Simmons

Member since: 02/08/2016

690 Reputation

5 Guides authored

Team

IUPUI, Team 1-3, Baechle Spring 2016 Member of IUPUI, Team 1-3, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G3

4 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 167