Introduction
This guide shows how to disassemble your vacuum enough to remove and replace a faulty power switch. It is a fairly simple process requiring only a long neck Phillips head screwdriver.
What you need
-
-
Remove nozzle by pressing two blue buttons with unlock symbols on the side of the nozzle.
-
Pull the nozzle upward.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
One Comment
Well, 50mm thin screw driver is also one of tool, normally people don't have it. Hence special mention of philips screw driver might help user.