Introduction

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

Make sure the blender is turned off and unplugged from all power.
  • Make sure the blender is turned off and unplugged from all power.

  • Remove the glass jar from the base of the blender.

Add Comment

Remove the top lid from the blender jar.
  • Remove the top lid from the blender jar.

Add Comment

Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
  • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

  • Take care not to cut yourself on the blades.

Add Comment

Lift the rubber washer straight up to remove it from the blade assembly.
  • Lift the rubber washer straight up to remove it from the blade assembly.

  • Take care not to cut yourself on the blades.

Add Comment

Lift the blades from the bottom cap.
  • Lift the blades from the bottom cap.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Andrew

Member since: 10/04/2012

170 Reputation

4 Guides authored

Team

Cal Poly, Team 6-34, Regan Fall 2012 Member of Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 43

All Time: 2,511