Introduction

In order to access electrical components and the belt within the motorized brush, the motorized brush must be disassembled. This disassembly guide demonstrates how to take the motorized brush apart.

Parts

No parts required.

Turn power OFF. Detach motorized brush from the vacuum.
  • Turn power OFF.

  • Detach motorized brush from the vacuum.

Add Comment

Use a spudger or a coin to turn the circular lock clockwise to unlock the brush roll. Remove the lock cover.
  • Use a spudger or a coin to turn the circular lock clockwise to unlock the brush roll.

  • Remove the lock cover.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Lift brush out of the enclosure.
  • Lift brush out of the enclosure.

Add Comment

Remove (4) 13.0 mm Phillips #0 head screws and remove the green cover. Remove (4) 13.0 mm Phillips #0 head screws and remove the green cover. Remove (4) 13.0 mm Phillips #0 head screws and remove the green cover.
  • Remove (4) 13.0 mm Phillips #0 head screws and remove the green cover.

Add Comment

Take out the motor assembly.
  • Take out the motor assembly.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Roman Dyagilev

Member since: 11/11/2017

201 Reputation

2 Guides authored

Team

IUPUI, Team S4-G4, Wilson Fall 2017 Member of IUPUI, Team S4-G4, Wilson Fall 2017

IUPUI-WILSON-F17S4G4

3 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 13

All Time: 63