Introduction

This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.

Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll. Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll. Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.
  • Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.

Add Comment

The guard notch will automatically be down in the locked position. Slide the guard notch to the unlocked position. Slide the guard notch to the unlocked position.
  • The guard notch will automatically be down in the locked position.

  • Slide the guard notch to the unlocked position.

Add Comment

Lift up the latch to the right of the guard notch to access the brush. While holding up the latch remove the brush.
  • Lift up the latch to the right of the guard notch to access the brush.

  • While holding up the latch remove the brush.

  • Hold up latch to place new brush roll back into place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Benjamin Bautista

Member since: 09/11/2017

110 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 22

All Time: 176