1. Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.
    • Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.

    Add Comment

  2. Using a screwdriver loosen the four screws connecting the body of the device together.
    • Using a screwdriver loosen the four screws connecting the body of the device together.

    Add Comment

    • Once unscrewed, pop the back of the device off using the plastic opening tool.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Take the back of the body and put it aside. We will be working with the back part of the device.

    Add Comment

    • Remove the rubber button by popping it out with the plastic opening tool.

    Add Comment

    • Loosen the screw on the chip with a screwdriver.

    Add Comment

    • Once the chip is off, loosen the screws on the plastic enclosing the speakers.

    Add Comment

    • Using the plastic opening tool, pop the plastic enclosing off.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Shreya Sunny

Member since: 09/04/2015

604 Reputation

6 Guides authored

Team

USF Tampa, Team 2-2, Sullivan Fall 2015 Member of USF Tampa, Team 2-2, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G2

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 15

All Time: 257