Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The frame cover protects the battery and the inside components of the device.

Parts

No parts specified.

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  4. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

Conclusion

To reassemble your device, follow these instructions in reverse order. Ensure that all sides of the frame cover are firmly snapped on before replacing the screws.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 108