Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The battery is what powers the device. The battery is secured by a sticky adhesive label and glue so be cautious when removing.

Parts

No parts specified.

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  4. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

  5. Remove the battery out using the black nylon spudger. Battery is secured by glue so use more force to take it out.
    • Remove the battery out using the black nylon spudger.

    • Battery is secured by glue so use more force to take it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 Comments

I replaced the battery but now there is a symbol on the screen, box with a question mark, what does that mean?

raybrooks - Reply

I hope someone else has had this issue an has a solution. Thank you in advance for any and all help.

raybrooks - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 420