Fix Your Stuff Community Store

BLACK and DECKER BDERO100 Hook and Loop System Replacement

Introduction

This guide provides information on how to remove and replace the hook and loop system of the BLACK and DECKER BDERO100 5 inch sander. The only tool that you will need for this process is the JIS - J1 bit or equivalent.

What you need

  1. BLACK and DECKER BDERO100 Hook and Loop System Replacement, Hook and Loop System: step 1, image 1 of 1

    • Remove the sanding paper from the velcro.

  2. BLACK and DECKER BDERO100 Hook and Loop System Replacement: step 2, image 1 of 1

    • Select the JIS - J1 bit or the most appropriate bit to match the screws for your model.

  4. BLACK and DECKER BDERO100 Hook and Loop System Replacement: step 3, image 1 of 2 BLACK and DECKER BDERO100 Hook and Loop System Replacement: step 3, image 2 of 2

    • Use the Bit Driver to take off the four 12.5 mm Phillips screws at the base of the hook-and-loop system.

    • Be careful not to lose the lock washers (black rings).

  5. BLACK and DECKER BDERO100 Hook and Loop System Replacement: step 4, image 1 of 2 BLACK and DECKER BDERO100 Hook and Loop System Replacement: step 4, image 2 of 2

    • Once all screws and washers have been removed, hold the hook and loop system and separate it from the device.

Author

with 2 other contributors

Christian Moss

Member since: 02/10/16

101 Reputation

1 Guide authored

Badges: 3

Team

USF Tampa, Team 1-5, Sullivan Spring 2016 Member of USF Tampa, Team 1-5, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G5

4 Members

6 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 9

All Time: 1,530