Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.
  • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

Add Comment

Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons. Slide the plastic opening tool gently along the sides. If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.
  • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

  • Slide the plastic opening tool gently along the sides.

  • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

Add Comment

Place the Spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.
  • Place the Spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

Add Comment

Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.
  • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

Add Comment

Deck the Halls
With tools and Fix Kits
Shove the Spudger below the battery pack to remove any tape or adhesive residue.
  • Shove the Spudger below the battery pack to remove any tape or adhesive residue.

Add Comment

Lift the battery up with your hands to ensure complete detachment from the screen.
  • Lift the battery up with your hands to ensure complete detachment from the screen.

Add Comment

Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"
  • Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"

Add Comment

Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.
  • Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.

Add Comment

Remove the red wire from the node labeled "B+"
  • Remove the red wire from the node labeled "B+"

Add Comment

Using the same process as the red wire, detach the black wire from the node labeled "B-".
  • Using the same process as the red wire, detach the black wire from the node labeled "B-".

Add Comment

The battery should now be separated from both the screen and circuit board
  • The battery should now be separated from both the screen and circuit board

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Steven Kavanagh

Member since: 03/24/2015

301 Reputation

3 Guides authored

Team

Baylor, Team 6-3, Shaver Spring 2015 Member of Baylor, Team 6-3, Shaver Spring 2015

BU-SHAVER-S15S6G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 156