Replacing the Wi-Fi module on why! W253EU

Step 1 Battery from why! Remove W253EU




• Turn off the computer.
• Before each operation it is important to start with the removal of the accumulator.
• Take the slide unlocked into position, remove the battery.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Access to RAM and CPU from why! W253EU



• Using a Philips #1 screwdriver, unscrew the 5 screws securing the cover.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Push the screwdriver a few millimeters under the cover so that it can be touched with your fingers.
• Now lift the cover carefully.
• Attention! Disconnect the ventillator cable so that the cover can be completely removed (see next step).
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Since the ventillator is mounted under the cover, its power supply cable must first be disconnected so that the cover can then be completely removed.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5 Wi-Fi Module
• Using a Phillips #1 screwdriver, remove the two screws securing the Wi-Fi module.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Special thanks to these translators:

de en

100%

oldturkey03

oldturkey03 is helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

Felice Suglia

Member since: 06/15/13

30,731 Reputation

261 Guides authored

Badges: 22

• 
• 
• 

+19 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview