Introduction
If your phone fails to charge, it could be due to a malfunctioning charging port. A charging port can be easily damaged by water, corrosion, and debris. This guide will help you replace your damaged charging port
What you need
-
-
Using a removable head screwdriver and a T3 bit, begin by removing the two screws located on either side of the charging port.
-
-
-
Gently wedge the opening tool between the phone and the back casing.
-
Move the opening tool up and down to pry the back off of the device.
-
-
-
Once the back has been removed, you will need to unscrew the four screws on the bottom panel with an AT3 bit.
-
-
-
-
Wedge an opening tool between the battery and phone.
-
Gently pry the battery out of the device.
-
-
-
Once the battery has been removed, gently wedge the metal spudger beneath the green panel.
-
Lift the panel along with the charging port out the device and replace with the new charging port.
-