Introduction
This guide will help with removing and/or replacing the back panel.
What you need
-
-
-
Turn off the computer and unplug the charge cable.
-
Turn the computer upside down.
Ask FixBot
-
-
-
-
Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UW Tacoma, Team 1-6, Liner Winter 2015 Member of UW Tacoma, Team 1-6, Liner Winter 2015
UWT-LINER-W15S1G6
5 Members
36 Guides authored
