Introduction
How to detach and reattach palmrest part (the plate with keyboard, touchpad, power button etc.)
What you need
-
-
Locate and unscrew the screw under the rubber cover
-
pop out the plastic cover
-
unscrew 5 screws marked in the picture (keep the screws separated by length and color)
-
-
-
pop out the rubbers plugs (7) around the laptop
-
unscrew screws under the plugs
-
-
-
If you have removed screw C in step 3 (pointed at in the picture) you can pull out the optical drive
-
remove all 3 screws revealed by removing the drive
-
-
-
-
flip laptop
-
pop open the speaker part
-
unplug speakers
-
remove 1 black screw on both sides
-
-
-
using a plastic prying tool separate the front plate(keyboard) from the rest of the laptop
-
-
-
gently lift the front plate
-
detach all four ribbons connecting the front plate to the motherboard
-
keep the light colored ribbon (it can be detached from the front plate as well)
-
-
-
connect the new front plate in the same spots as the old one
-
if needed reconnect the light colored ribbon on both the front plate and the motherboard
-
push the new plate back in place, make sure all sides are in
-
-
-
reconnect the speakers
-
push in place the whole speaker panel
-
-
-
screw back the 3 screws in the optical drive slot
-
slide in the drive
-
secure with screw C (circled in second picture)
-
-
-
put in place all screws in the back panel
-
the screw on the very left is the longest
-
push back in the plastic cover
-
return the silver screw covered by the rubber cover
-
-
-
screw in the last 5 screws in the battery panel
-
push back in the battery
-
done!
-