Introduction

This guide will walk users through the disassembly of their Asus device.

Parts

No parts required.

Image 1/1: Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.
  • Ensure the laptop is powered down before continuing.

  • Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.

Add Comment

Image 1/1:
  • Use the spudger to pry open the rear cover at either hinge.

Add Comment

Image 1/2: Be careful not to break any tabs on the cover when lifting it off. Image 2/2: Be careful not to break any tabs on the cover when lifting it off.
  • Grab the cover with your fingers and gently lift it away from the board.

  • Be careful not to break any tabs on the cover when lifting it off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tanner

Member since: 01/25/2017

201 Reputation

2 Guides authored

Team

Cal Poly, Team 8-1, Banghart Winter 2017 Member of Cal Poly, Team 8-1, Banghart Winter 2017

CPSU-BANGHART-W17S8G1

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 16

All Time: 143