Introduction

This guide will help with removing and/or replacing the back panel.

Image 1/1: If the computer is on or plugged in, it could cause electric shock.
  • Turn off the computer and unplug the charge cable.

  • If the computer is on or plugged in, it could cause electric shock.

  • Turn the computer upside down.

Add Comment

Image 1/1:
  • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

Add Comment

Image 1/2: Image 2/2:
  • Use a plastic opening tool to gently remove the back panel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Raveena

Member since: 02/08/2015

152 Reputation

1 Guide authored

Team

UW Tacoma, Team 1-6, Liner Winter 2015 Member of UW Tacoma, Team 1-6, Liner Winter 2015

UWT-LINER-W15S1G6

5 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 26

All Time: 1,175