Image 1/1:
  • Hold down the power button

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use plastic opening tool to pry off the back cover of the phone.

Add Comment

Image 1/3: Look for the widest gap on either side of the battery. Using the plastic opening tool carefully lift battery out. Image 2/3: The battery is held down with adhesive. Be careful not to damage battery or connecting cord. Image 3/3: Disconnect battery connecting cord using tweezers.
  • Remove the warning sticker that covers the battery plug and connecting cord.

  • Look for the widest gap on either side of the battery. Using the plastic opening tool carefully lift battery out.

  • The battery is held down with adhesive. Be careful not to damage battery or connecting cord.

  • Disconnect battery connecting cord using tweezers.

Add Comment

Image 1/2: Use of magnetic pad will help with keeping track of screws. Image 2/2: Once screws are out, remove the plate.
  • Use T5 Torx screwdriver to remove 14 screws from internal back plate.

  • Use of magnetic pad will help with keeping track of screws.

  • Once screws are out, remove the plate.

Add Comment

Image 1/2: Use tweezers to unplug the device from the circuit board. Image 2/2: Use tweezers to unplug the device from the circuit board.
  • Use tweezers to remove motor from housing, pulling the plug downward away from the phone.

  • Use tweezers to unplug the device from the circuit board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Zach Standridge

Member since: 09/25/2014

308 Reputation

2 Guides authored

Team

USF Tampa, Team 5-4, Mcgee Fall 2014 Member of USF Tampa, Team 5-4, Mcgee Fall 2014

USFT-MCGEE-F14S5G4

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 1,079