Introduction

You will learn how to replace the motherboard. Review this guide if you are having difficulties with the motherboard. In order to replace the motherboard, you have to remove the battery. Please use our Asus MeMO Pad HD 8 ME180A Battery Replacement Guide to do so prior to starting.

Use a plastic opening tool to separate the back half from the front half. Pull the back panel away from the device.
  • Use a plastic opening tool to separate the back half from the front half.

  • Pull the back panel away from the device.

  • The volume buttons can fall out of the case. Be careful not to lose them.

Add Comment

Ensure that you are wearing your Anti-Static Wrist Strap.
  • Ensure that you are wearing your Anti-Static Wrist Strap.

Add Comment

Lift the white bar on the ZIF connector and pull the metal connector out. Lift the white bar on the ZIF connector and pull the metal connector out. Lift the white bar on the ZIF connector and pull the metal connector out.
  • Lift the white bar on the ZIF connector and pull the metal connector out.

Add Comment

Deck the Halls
With tools and Fix Kits
Using your spudger, press down on the two spots shown in order to release the cables. Ensure that the touchscreen cables are fully disconnected.
  • Using your spudger, press down on the two spots shown in order to release the cables.

  • Ensure that the touchscreen cables are fully disconnected.

Add Comment

Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws. Pull the battery out.
  • Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws.

  • Pull the battery out.

Add Comment

Disconnect GPS Antenna cable.
  • Disconnect GPS Antenna cable.

Add Comment

Flip the latch and pull the ribbon cable to disconnect the ZIF connector.
  • Flip the latch and pull the ribbon cable to disconnect the ZIF connector.

Add Comment

Flip the latch and pull the ribbon cable to disconnect the ZIF connector.
  • Flip the latch and pull the ribbon cable to disconnect the ZIF connector.

Add Comment

Use a PH#0 screwdriver to unscrew the six 3.0 mm black screws. Lift the motherboard straight up to remove.
  • Use a PH#0 screwdriver to unscrew the six 3.0 mm black screws.

  • Lift the motherboard straight up to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rebecca Ellerhorst

Member since: 10/04/2016

501 Reputation

5 Guides authored

Team

USF Tampa, Team 2-5, Nance Fall 2016 Member of USF Tampa, Team 2-5, Nance Fall 2016

USFT-NANCE-F16S2G5

3 Members

5 Guides authored

One Comment

Où je peux avoir une carte mère pour asus memo pad8 me 180

David Leblanc - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 12

All Time: 317