Introduction

This guide will show you how to replace a battery for a Asus MeMO Pad 7. The battery replacement is a simple procedure. If the battery is dead, the replacement could help your tablet to turn on.

Parts

No parts required.

Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter. The panel will be glued on and requires pressure to open.
  • Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.

  • The panel will be glued on and requires pressure to open.

Add Comment

After removing the rear panel, use a plastic openning tool to remove the frame of the tablet. Start in the middle of the top side and insert a plastic opening tool between the screen and the frame. Carefully run the plastic opening tool along all the edges of the tablet.
  • After removing the rear panel, use a plastic openning tool to remove the frame of the tablet.

  • Start in the middle of the top side and insert a plastic opening tool between the screen and the frame.

  • Carefully run the plastic opening tool along all the edges of the tablet.

Add Comment

When you take the rear panel and the frame out, place the rear panel and the frame away from the device.
  • When you take the rear panel and the frame out, place the rear panel and the frame away from the device.

Add Comment

Disconnect the ZIF connectors to release the data cables holding the battery in.  Use tweezers to do this. You can also use your hand to remove ZIF connectors. ZIF connectors are delicate so be careful when you are removing them.
  • Disconnect the ZIF connectors to release the data cables holding the battery in. Use tweezers to do this.

  • You can also use your hand to remove ZIF connectors.

  • ZIF connectors are delicate so be careful when you are removing them.

Add Comment

Find the place where the battery connector is. Disconnect the battery connectors by carefully pulling up on them using a spudger or plastic opening tool.
  • Find the place where the battery connector is. Disconnect the battery connectors by carefully pulling up on them using a spudger or plastic opening tool.

Add Comment

Using a plastic opening tool carefully pry the battery loose. The battery is glued to the pad; slight pressure will be needed to remove the battery. The casing of the battery is soft and can easily tear. Tearing can lead to the chemicals in the battery to leak out. The casing of the battery is soft and can easily tear. Tearing can lead to the chemicals in the battery to leak out.
  • Using a plastic opening tool carefully pry the battery loose. The battery is glued to the pad; slight pressure will be needed to remove the battery.

  • The casing of the battery is soft and can easily tear. Tearing can lead to the chemicals in the battery to leak out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Tyler Tripp

Member since: 08/26/2015

375 Reputation

3 Guides authored

Team

USF Tampa, Team 14-23, Meier Fall 2015 Member of USF Tampa, Team 14-23, Meier Fall 2015

USFT-MEIER-F15S14G23

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 30

Past 7 Days: 167

Past 30 Days: 530

All Time: 5,033