Introduction

If you are having trouble with audio output on your device this guide can be useful. Be careful when unplugging wires as to not damage them.

Place device  bottom-side up.
  • Place device bottom-side up.

Add Comment

Remove the eight 9.0 mm Philips screws along the perimeter of the case.
  • Remove the eight 9.0 mm Philips screws along the perimeter of the case.

  • Remove the three 6.0 mm Philips screws from the center of the case.

Add Comment

  • Using a plastic opening tool, separate the bottom case at the steam.

Add Comment

  • Open the Chromebook at hinges.

Add Comment

  • Remove the 6 6.0mm Philips screws, using the 64 bit driver from around the battery.

Add Comment

  • Unplug wire using the plastic opening tool that connects battery with board

Add Comment

  • Lift the battery out of the laptop

Add Comment

  • Use plastic opening tool to pry off the wire connecting the left side speaker to the circuit board.

Add Comment

  • Use plastic opening tool to pry off the left side speaker.

Add Comment

  • Gently remove the wire connecting the left and right speakers from it's channel. Be careful as to not tear or damage the wire.

Add Comment

  • Use plastic opening tool to pry off right side speaker.

Add Comment

  • Lift and remove both speakers and connecting wire.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

wyatt boyatt

Member since: 09/25/2017

502 Reputation

5 Guides authored

Team

USF Tampa, Team S4-G3, Eyestone Fall 2017 Member of USF Tampa, Team S4-G3, Eyestone Fall 2017

USFT-EYESTONE-F17S4G3

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 30