Asus Chromebook C300MA-BBCLN12 Keyboard Replacement

Step 1 Keyboard




• Remove the eight 9.0mm PH00 Phillips screws along the perimeter of the bottom housing.
• Remove the three 6.0mm PH00 Phillips screws from the center of the bottom housing.
Step 2




• Separate the palm rest assembly from the bottom housing using the plastic opening tool.
• It is recommended that you start from a corner and run the tip of the plastic opening tool along the edge of the housing.
• Lift the palm rest assembly slowly to prevent damaging the two cables connecting it to the motherboard.
Step 3
• Flip back the hinges on the connectors that secure the wide black cable and the narrow white cable using the tweezers.
• Disconnect the wide black cable from the motherboard by pulling the blue cable tab straight out of the connector.
• Disconnect the white ribbon cable from the motherboard by pulling the blue cable tab straight out of the connector.
Step 4
• Flip back the hinge on the connector that secures the white ribbon cable to the underside of the palm rest assembly using the tweezers.
• Disconnect the white ribbon cable from the palm rest assembly by pulling the cable straight out of the connector.
Step 5
• Remove the palm rest assembly from the bottom housing and lay it on a flat surface with the keyboard facing downward.
• Remove the four 5.0mm PH00 Phillips screws securing the keyboard to the palm rest assembly.
• Separate the keyboard from the palm rest assembly.

Author

with 5 other contributors

Brooke Austin

Member since: 10/05/17

419 Reputation

4 Guides authored

Badges: 5

• 
• 
• 

+2 more badges

Team

Portland State University, Team S1-G2, Read Fall 2017 Member of Portland State University, Team S1-G2, Read Fall 2017

PSUN-READ-F17S1G2

4 Members

10 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview