Apple TV 4K Logic Board Replacement

Step 1 Logic Board

• Use a spudger to pry the bottom panel off from the body. It is held on with clips on the inside, so you will need to make sure those are undone while opening.
• The panel is held onto the device tightly, so you may need to be a bit forceful to remove it.
Step 2



• Remove the following screws using a T6 Torx screwdriver holding the heat sink assembly in.
• Four 10 mm screws
• Lift and remove the heat sink assembly from the device.
Step 3
• Use plastic spudger to pull up on all three antenna connectors to remove them.
• Remove rubber piece from front side of device.
Step 4
• Unscrew the following screws holding the logic board in place using the T7 Torx:
• Two black 3 mm screws
• Two silver 4 mm screws
Step 5
• Use a spudger to pry up logic board. Try lifting it up from the front side.
• Remove logic board and set aside.

Author

with 6 other contributors

Keenan Barber

Member since: 10/04/18

1,159 Reputation

3 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

UW Stout, Team S6-G3, Ogden Fall 2018 Member of UW Stout, Team S6-G3, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G3

4 Members

15 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview