Apple AirPort Extreme Model A1034 Antenna Replacement

You're viewing a previously published version of this guide. View latest version

Oct 21, 2014 - 03:45:11

Jan 06, 2015 - 03:10:58 Oct 21, 2014 - 03:45:11 Jan 28, 2014 - 02:45:30 Dec 31, 2013 - 03:11:31 Dec 31, 2013 - 03:11:12 Dec 31, 2013 - 03:11:12 Dec 31, 2013 - 09:35:59 Dec 31, 2013 - 09:35:59 Dec 31, 2013 - 09:34:26 Sep 04, 2013 - 05:12:29 Jul 31, 2013 - 04:17:47 May 08, 2013 - 03:13:07 May 01, 2013 - 03:13:14 Dec 02, 2011 - 11:47:04 Nov 18, 2011 - 01:21:06 Nov 08, 2011 - 03:53:04 Nov 08, 2011 - 03:30:50 Nov 08, 2011 - 03:29:56 Nov 08, 2011 - 03:29:13 Nov 03, 2011 - 03:38:27 Nov 03, 2011 - 03:36:00 Nov 03, 2011 - 03:35:27 Nov 03, 2011 - 03:33:47 Nov 03, 2011 - 03:33:45 Nov 03, 2011 - 03:16:59 Nov 03, 2011 - 03:02:28 Nov 03, 2011 - 02:47:10 Nov 03, 2011 - 02:47:08 Nov 03, 2011 - 02:33:36 Nov 03, 2011 - 02:32:10

Newer

Introduction

Replace a faulty antenna on the AirPort Extreme Model A1034.

Step 1 Outer Case

Apple AirPort Extreme Model A1034 Antenna Replacement, Outer Case: step 1, image 1 of 1

Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Step 2

Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

Step 3

Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Step 4

Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Step 5 Antenna

Apple AirPort Extreme Model A1034 Antenna Replacement, Antenna: step 5, image 1 of 1

Remove the two 4mm phillips screws to remove antenna.

Step 6

The circuit board connected to the antenna is attached to the metal case with foam adhesive.
Gently peel or cut the foam holding the circuit board with a knife and remove it from the AirPort.