Alienware 17 R2 Screen Replacement

You're viewing a previously published version of this guide. View latest version

Jun 11, 2019 - 11:19:11

Jun 11, 2019 - 11:19:11 Jan 11, 2018 - 01:00:02 Jan 11, 2018 - 12:59:52 Jan 11, 2018 - 12:59:05 Jan 11, 2018 - 12:58:59 Nov 27, 2017 - 01:52:09 Nov 27, 2017 - 01:51:20 Nov 27, 2017 - 01:50:14 Nov 20, 2017 - 01:41:04 Nov 20, 2017 - 01:40:06 Nov 20, 2017 - 01:39:02 Nov 20, 2017 - 01:33:57 Nov 20, 2017 - 01:30:26 Nov 15, 2017 - 10:36:22 Nov 15, 2017 - 10:32:46 Nov 15, 2017 - 10:30:05 Nov 15, 2017 - 10:28:44 Nov 14, 2017 - 11:29:19 Nov 14, 2017 - 11:26:06 Nov 14, 2017 - 11:23:13 Nov 14, 2017 - 11:21:08 Nov 14, 2017 - 11:17:33 Nov 13, 2017 - 03:07:09 Nov 13, 2017 - 03:06:27 Nov 13, 2017 - 03:03:52 Nov 13, 2017 - 03:02:54 Nov 13, 2017 - 03:00:53 Nov 13, 2017 - 02:59:23 Nov 13, 2017 - 02:58:52 Nov 13, 2017 - 02:56:52 Nov 13, 2017 - 02:55:28 Nov 13, 2017 - 02:53:21 Nov 13, 2017 - 02:52:29 Nov 13, 2017 - 02:50:58 Nov 13, 2017 - 01:54:26 Nov 06, 2017 - 03:22:28

Newer

Introduction

One of the causes for a blank or pix-elated screen could because it is cracked. In this guide, we will show you how to replace your screen.

What you need

Step 1 Display

Alienware 17 R2 Screen Replacement, Display: step 1, image 1 of 1

Put the laptop on a hard surface.
Make sure that the Alienware is not plugged into any power source.
First, we need to unplug the battery.

Step 2

To unplug the battery, turn the computer upside down.
Remove the two 4mm screws from the plastic covering protecting the inner part of the laptop.

Step 3

Gently, pull the cover up and slide it off.

Step 4

Alienware 17 R2 Screen Replacement: step 4, image 3 of 3

Now, you are going to look for a yellow tag.
Unplug the black wire that has the yellow tag.
This with successfully disconnect your battery.

Step 5

Using the plastic opening tool, gently remove the black plastic casing from the LCD screen.
Run the opening tool along the inner side of the computer where the screen and the plastic covering meet.