Introduction

This guide serves as a prerequisite guide to replacing the front speaker, front camera, headphone jack, and charging port of an Alcatel One Touch Evolve 2 phone.

Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents. Remove the back cover using one of the plastic opening tools and the slit in one of the corners. Be gentle when prying so as to not wear out the tool.
  • Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.

  • Remove the back cover using one of the plastic opening tools and the slit in one of the corners.

  • Be gentle when prying so as to not wear out the tool.

Add Comment

Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.
  • Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

Add Comment

Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.
  • Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

Add Comment

Deck the Halls
With tools and Fix Kits
Insert a metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose. Insert a metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose. Insert a metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.
  • Insert a metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

Add Comment

Pull the rear frame off with your hands. Pull the rear frame off with your hands.
  • Pull the rear frame off with your hands.

Add Comment

Pull the front speaker off the motherboard using one of the plastic opening tools. Pull the front speaker off the motherboard using one of the plastic opening tools.
  • Pull the front speaker off the motherboard using one of the plastic opening tools.

Add Comment

Pry off the front camera by using one of the plastic opening tools.
  • Pry off the front camera by using one of the plastic opening tools.

Add Comment

Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.
  • Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.

Add Comment

Detach the main circuit board from the front cover.
  • Detach the main circuit board from the front cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Bai

Member since: 01/30/2017

582 Reputation

5 Guides authored

Team

IUPUI, Team 1-3, Baechle Spring 2017 Member of IUPUI, Team 1-3, Baechle Spring 2017

IUPUI-BAECHLE-S17S1G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 32

All Time: 431