Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

The purpose of this guide is to provide instructions on removing batteries from the Air Hog Smash Bots. A soldering iron will need to be used for this, directions on how to solder can be found here.

Parts

No parts specified.

  1. Using the Phillips #0 screwdriver to remove the 8 mm screw.
    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

  2. Lift and slide the batter cover  away from the tab holding it in place at the bottom.
    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

  3. Remove the 3 AAA batteries.
    • Remove the 3 AAA batteries.

Nick Ciulla

Member since: 02/08/2016

240 Reputation

2 Guides authored

Team

IUPUI, Team 1-1, Baechle Spring 2016 Member of IUPUI, Team 1-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G1

4 Members

7 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 76